You have no items in your shopping cart.
The Hardless NG4L is an all in one whole house water filter and conditioner that connects to the main water entrance of your home. It gives you the benefits of reducing the hardness in your water while removing sediment and debris all in one small compact unit.
The filter is made in Israel, a country that is known for having the latest developments in water technology.
Features And Benefits
The water is filtered by passing through a microfilter made of stainless steel and a cartridge containing slow phos. The stainless steel filter filters out sediment and debris while the slow phos crystals change the structure of the minerals to reduce limescale buildup and keep your pipes clean.
The slow phos crystals are manufactured in the United States and are certified with NSF 42.
*It is important to note that the Hardless NG4L is meant for municipal water only. It is not meant for water that is considered to be microbiologically unsafe.
**The Hardless NG4L leaves in the beneficial and necessary minerals, therefore, a TDS/ppm test is not effective.
Below are the steps. Please also take a look at the Hardless NG4/NG4L User Manual
1. Turn off the main water supply.
2. Open the valve at the bottom of the filter to release pressure and drain the water.
3. Open the filter with your hands or by using the auxiliary key. Turn clockwise.
4. Pull up on the water conditioning cartridge.
5. Separate the stainless steel filter (orange) from the water conditioning cartridge.
6. Replace the old cartridge with a new one and connect it to the stainless steel filter.
7. Place securely into the filter body.
8. Screw on the filter top and tighten with the auxiliary key. Do not over tighten.
9. Close the valve at the bottom.
10. Slowly turn on the main water and check for leaks.
The scale in our drinking water consists of calcium ions, magnesium and hydrocarbon ions (bicarbonate), which are actually good minerals for you and provide some of the necessary minerals for the human body-especially calcium and magnesium. But the same minerals that are good for you, form a scale buildup in your pipes, on heating elements, and in your water appliances, especially in the process of heating water- a process that accelerates the settling of limescale.
Unlike water softeners, which use salt to remove the minerals and replace those minerals with salt ions, the Hardless NG4/NG4L modifies the crystalline structure of the minerals in order to reduce the problems that are caused by hard water but leaves them in the water because they are healthy to drink.
When the scale sticks to a heating element it forms an insulating layer. Heating time increases and as a result so do your electricity costs. Additional damage is caused to your pipes, which become clogged to the point where not as much water can pass through and can eventually crack causing a major leak in your home. By installing a Hardless NG4 filter, you will extend the life of any heating elements and of your pipes.
The NG4/NG4L is approved by the Israeli Standards Institute Standard No. 1505.
The slow phos crystals have NSF 41 for use with drinking water.
**(These certifications will be found under the name Amiad Compact and Amiad Alpha)
Water heater, washing machine, dishwasher, coffee machine, water pipes, faucets, shower heads, gaskets in toilets or anywhere where water passes and scale can settle.
The NG4 and NG4L treat scale and filter the water from particles. The 50-micron mesh filter is designed to stop dirt and particles (sand, small stones, rust) that reach the domestic water infrastructure. The slow phos cartridge takes care of reducing the limescale buildup that occurs in your pipes and water appliances.
Although some people do install the unit right before the water heater, when installed at the entrance to the house the filter can take care of all your plumbing, faucets, and water appliances without having to buy separate filters.
As part of our concern for our quality of life, we want to have good water quality in our home. When choosing a water filter, we need to think about what is important to us; Are we looking for something that will remove everything from the water such as with a reverse osmosis system? Do we want to treat the water from just one tap in the house or from all the taps? Is it important that there be less limescale buildup in our water appliances and pipes? Is the unit we are using reliable? The NG4 and NG4L is manufactured in Israel by Amiad, a company well known for its advances in the technology of water filtration. It also will reduce limescale buildup in your pipes and water appliances saving energy, water (no backwash) and unnecessary expenses. It is designed to serve the whole house and not just one specific tap.
Yes. This can be done by purchasing the conversion kit and can be done by yourself. It is important to note that if you are considering this, you should be sure to leave enough space when installing your unit. The NG4L is 10 inches longer than the NG4.
All that is needed is to replace the water conditioning cartridge about every 6 months and at that time to clean the mesh filter. This maintenance can be done by yourself.
In areas that have high amounts of debris or sediment in the water, you may need to clean the stainless steel filter more often.
The Hardless NG4 should be used with municipal water only. It is not meant for water that is microbiologically unsafe to drink. It can only be used with well water if it is already potable or if the water has been through a chlorination process.
The filter can be installed at different angles but we do recommend to install it vertically with the bottom part facing downwards.
The best place to install the filter is at the main water entrance to the house or on a cold water line.
There is no wasted water and no salt.
Reverse osmosis systems use 2-5 gallons of water for every clean gallon of drinking water while many other filtration or water softener systems need to do a backwash every 10-14 days. This backwash can take anywhere from 25-40 gallons of water that gets wasted.